Directions 281-5588-CAR

If you want to drive at today’s highway speeds – or just want to drive safely – brakes are what it’s all about.

What do brakes do?
Most people think that brakes stop the car. Wrong! It’s the friction of the tires against the road that slows down and stops a car – the brakes actually stop the wheels from turning.

Because most modern cars use disc brakes exclusively, we will ignore drum-type brakes for this article. To simplify things, we won’t get into anti-lock brakes either.

Disc brakes consist of five things:

  • Brake discs (or rotors)
  • Calipers
  • Brake pads
  • Brake lines
  • Brake master cylinder

A disc brake has a plate-like disc (also called a rotor) attached to the wheel. This plate is squeezed by the brake pads within a caliper, much the same way that you might squeeze a spinning plate between your thumb and fingers to slow it down.

The brake pads consist of two layers: a metal backing plate and a high-friction material that does the work by pressing against the brake disc. In addition to serving as a “platform” for the friction material, the backing plate also protects the brake caliper from excessive heat buildup.

Calipers
The brake caliper that wraps around part of each disc contains small pistons. These pistons push the brake pads against the disc. The pistons are pushed outward by the hydraulic action of brake fluid that comes from the brake master cylinder.

The caliper often contains two or more such pistons so that the brake pads will evenly distribute pressure against the brake disc.

Generally speaking, the more pistons in a caliper, the more evenly the pressure on the pads is spread onto the brake disc, which is why high-performance cars have multiple-piston brake calipers.

The hydraulic brake pressure is built up in the master cylinder by the action of your foot on the brake pedal. The pressure travels through the brake lines from the master cylinder to the calipers.

Most brake systems have power assistance that helps increase the action of your foot on the brake pedal, reducing the braking effort.

Heat is the enemy
Now that we know the basics of how brakes work, it would be good to know what causes problems. Heat is the No. 1 enemy of good braking.

As the brake pads press against the brake disc, an enormous amount of heat is generated. To remove this heat, especially from the heavily loaded front brakes, the disc is usually ventilated with internal vanes that pull cooling air from the center of the disc to the outer edges. By “pumping” hot air away from the discs, the brakes remain cooler and less prone to “fading.”

Fading occurs when the brakes are overused and overheated. In the worst cases, the brake fluid can actually boil in the calipers, causing a loss of braking ability. When brakes fade:

The pedal depresses farther, closer to the floor.
The pedal sometimes goes all of the way to the floor without any braking action occurring, in the case of badly faded brakes.
The distances it takes to stop increase dramatically.
The brakes emit a burning odor.
In the most extreme cases, the brakes can actually smoke or catch on fire.
When brake fade happens, the only thing you can do is pull over and allow your brakes to cool.

%d bloggers like this: